POE Injectors

If you need to power a single camera or POE Powered Device but you don't need or want to use a POE switch, then you need a POE injector.

A POE Injector works by inserting the injector inline between your switch or router. The injector will then pass through the data coming from your switch or router while at the same time injecting POE power through to the end device that needs POE. These are great options whenever you need to power just one device and you don't necessarily have the need for a POE switch. 

We also have multi-port POE injectors. Multi-port POE Injectors, sometimes referred to as POE Hubs, are great options to use if you have a favorite non-POE switch that you want to continue using in your installation but you need to inject POE into the end devices. These allow you to use any brand non-POE switch while still giving you the ability to inject POE.

All of our POE Injectors are high powered IEEE802.3bt POE ++ Injectors, outputting up to 90 watts of POE power which is the highest active POE power. The injectors are also backwards compatible to IEEE802.3af and IEEE 802.3at standards so whether you need to push a power hungry device such as a PTZ or POE lighting or just a small device like a small cube camera, these injectors will work in all scenarios.